Home > News > Content
5 Points To Be Noted For Plate Cooler For Engineering Activation
Jul 04, 2017

With the improvement of people's living standards, many families now installed their own water heaters, a variety of water heaters, the market is endless, our company's Cooler for Engineering became a lot of people's main buy products.

It is generally applicable to the general industrial and civil construction of the hot water supply system, heat media can be either steam or high-temperature, low-temperature hot water, alternately use steam or high and low temperature hot water, the design of the selection please indicate the variety of heat medium. What are the technical features of it?

(1) Heat transfer, heat medium temperature drop big, by hot water temperature rise;

(2) The size of the tank is small, the space needed to draw the coil is small, and the area is province;

(3) Small cold, high volumetric efficiency;

(4) Maintain the volume type Cooler for Engineering water storage, water head loss is small, safe, convenient to clean up the advantages of fouling;

(5) Apply to high-temperature water, low-temperature water, steam three kinds of heat transfer heat medium.

1, the Cooler for Engineering to suppress the test after qualified, can be cast, to enable the front row to save water.

2, check each pour, vent valve is flexible and easy to use and switch position, pressure gauges, thermometers are all installed.

3, check the foundation, the support is solid, the bolts are full buckle, fastening.

4, when the Cooler for Engineering is cast, cast the cold flow first, then the hot heat.

5, in the casting of cold medium or hot medium, the first to ensure that the auxiliary line unblocked, and then slowly open the exit valve, check the problem after opening the entrance valve, must be slowly opened to prevent pressure. The process of casting should pay attention to observing the change of equipment. After the plate Cooler for Engineering is put into use, the leakage phenomenon may occur with the change of the temperature pressure, which should be checked in time.