Home > News > Content
How To Improve The Cooler For Transportation Vehicles
May 27, 2017

In the Cooler for Transportation Vehicles product design will be from three aspects to enhance the cooling effect of the cooler:

First, a reasonable process design. Under the same heat load, the process design of a reasonable Cooler for Transportation Vehicles can get a smaller heat transfer area, but also save investment. Process design unreasonable and the use of multi-process design, not only to increase the operating costs of equipment, hot and cold media in the board is not all countercurrent, thus affecting the cooling effect, and it is prone to channel congestion phenomenon is not conducive to the whole operation.

Second, the hot and cold circulation range. At present, many of the cooling conditions are cold and heat on both sides of the treatment capacity, so if you use this method, you can adjust the Cooler for Transportation Vehicles on both sides of the circulation of the cross-sectional area to adjust the heat flow between the two sides , So as to improve the medium handling capacity of the side of the convective heat transfer coefficient, and then can achieve the purpose of improving the cooling effect of the whole machine. This method under the Cooler for Transportation Vehicles resistance is very low, when the resistance increases will not exceed the system allow the resistance value, it is the best way to improve the heat transfer efficiency of a solution.

Third, in the transport tanker between the import and export of a bypass pipe. By controlling the opening degree of the control valve and the amount of water in the heat exchanger to meet the system requirements for the cooler resistance, and through the bypass pipe water and cooler outlet water mixture to meet the system requirements of the water supply temperature. This method is only in the unequal temperature difference heat transfer conditions, for the large amount of side resistance is too large and increase the cooler heat transfer area of a mitigation measures.

The above is to enhance the cooling effect of the Cooler for Transportation Vehicles three views. The user should be in the cooler running to check its cooling effect, if the cooling effect is not good to find out the reasons for the time, is the cause of the tanker itself or because of improper operation caused by, if it is the cause of the cooler, then you need to follow The specific circumstances of the repair or replacement.