Home > News > Content
The Role Of The Components Of A Cooler For Transportation Vehicles
Jul 04, 2017

The Cooler for Transportation Vehicles is a new type of high efficiency heat exchanger, which is named after heat exchange through the plate. The knowledge that the customer needs to know when making the purchase includes the parts of the heat exchanger. Explain the role of various parts of the Cooler for Transportation Vehicles:

1, fixed pressure plate: Do not contact with the fluid, with clamping bolts fastening after pressing gasket to ensure sealing. The main is clamping down all the heat transfer plate, to ensure that the fluid medium does not leak.

2, HEAT EXCHANGER GASKET: The main role of heat transfer components, general corrugated to do adult shape, in accordance with the different fluid medium, heat transfer plate material is not the same, most of the use of stainless steel and titanium production.

3. Sealing GASKET: The sealing gasket of the Cooler for Transportation Vehicles is mainly sealed between the heat exchanger plates. Materials are: NBR, EPDM rubber, fluorine rubber, etc., according to different medium using different rubber. Prevent fluid from being synthesized or leaked and distributed among different plates.

4, take over, flange: Provide import and export for fluid.

5, up and down guide rod: to withstand the weight of the plate and ensure the size of the installation, so that the plate slides in the meantime, the guide rod is usually better than the Heat exchanger board leader, in order to loosen the clamping bolt sliding plate inspection cleaning. The upper guide rod is fixed on the fixed pressing plate and the prop, and the plate is supported and positioned. The lower guide rods are positioned on the plate, and the plate is positioned with the upper guide bar.

6. Rolling device: Enable the movable pressing plate or the middle spacer plate to slide in the upper and lower guide bar to check and repair.

7, active pressure plate: paired with the fixed pressure plate, can slide on the guide rod to check and repair in plain clothes.

8, the front pillar: Support heat exchange weight, so that the entire heat exchanger composition.

9, clamping bolts: Compression Plate group, so that the heat exchanger to ensure the integrity of the seal, for rubber-type gaskets generally in the sign of the largest and 10, minimum pressure size, when pressing to the minimum size to replace the gasket. It is mainly the function of fastening the two ends of the plate. Clamping bolts are usually two-headed thread, the tightening of the bolts, so that the moment of the fixed plate evenly.

11, Mid-spacer plate: In the fixed pressure plate and movable pressure plate in different positions in the middle of the installation of the plate, can make a device simultaneously processing a variety of media, perform multiple operations.

The Cooler for Transportation Vehicles has the characteristics of compact and lightweight structure, small footprint, with the same pressure loss, its heat transfer coefficient ratio tube heat exchanger is 3-5 times higher, the area is one-third of tubular heat exchanger, and the heat recovery rate can be as high as 90%. Because of these notable characteristics, the use of Cooler for Transportation Vehicles is more and more extensive.